IPC@CHIP® RTOS-PPC – API Documentation
MAX_POWER_SUPPLY=Maximum power supplied via USB root port
Use this entry to tell the @CHIP-RTOS-PPC USB stack how much power can be supplied to a bus-powered device via each of the root hub's ports. The value is given in mA.
The default value is 500. This means that if you do not specify a value here, the USB stack assumes, that your hardware is able to supply up to 500 mA to USB devices per root port.
BULK_PER_FRAME=Maximum number of BULK transfers
This setting has no effect on SC2x3, because the USB host controller of the SC2x3 determines the optimal value itself.
Top of page
Copyright © 2017
Beck IPC GmbH
Generated on Thu Jan 26 16:21:35 2017 by