IPC@CHIP® RTOS-PPC – API Documentation

Header image

Main page


CHIP.INI [SERIAL]


[SERIAL]
UARTx_BAUD=baud rate

Sets the default BAUD rate of the specified UART. UART1 - UART6 can be selected.
Default:
By default, the baud rate is 19200 bit/s (with 8 data bits, no parity bit and 1 stop bit).
Example:
 [SERIAL]
 UART1_BAUD=9600
 UART2_BAUD=115200
Since:
SC2x3 V1.00


[SERIAL]
UARTx_RECVQUEUE=size in bytes

Sets the receive queue size of the UART port. UART1 - UART6 can be selected. Minimum size is 1024. Maximum size is 10240 byte.

If it is planned to use PPP server or PPP client the size should set to at least 4096.
Default:
By default, the receive queue size is 2048 byte.
Example:
 [SERIAL]
 UART1_RECVQUEUE=4096
Since:
SC2x3 V1.00


[SERIAL]
UARTx_SENDQUEUE=size in bytes

Sets the send queue size of the UART port. UART1 - UART6 can be selected. Minimum size is 1024. Maximum size is 10240 byte.

If it is planned to use PPP server or PPP client the size should set to 4096.
Default:
By default, the send queue size is 2048 byte.
Example:
 [SERIAL]
 UART1_SENDQUEUE=4096
Since:
SC2x3 V1.00





Top of page | Main page

Copyright © 2017 Beck IPC GmbH
Generated on Thu Jan 26 16:21:35 2017 by Doxygen 1.6.1