IPC@CHIP® RTOS-LNX – API Documentation

Header image

Main page


CHIP.INI [DEVICE]


[DEVICE]
NAME=Define the name of this device

This name will show up with the 'Chiptool' software when the network is scanned.

Maximum name size: 20 characters
Default:
No default.
Example:
[DEVICE]
NAME=MyChip
Since
V0.80


[DEVICE]
SAFEMODE=0/1

Disable (0) / Enable (1) the CHIP.INI safe mode. If the safe mode is disabled, then all internal services, like FTP server, Web server, Telnet server, UDP config server etc. are enabled with default settings. This allows an easy startup with the IPC@CHIP®. Services must be disabled explicitly.

If the user enables the safe mode setting, all internal services are disabled per default. Services must be enabled explicitly. This mode is useful when preparing for a release. It also assures that after an update to a future RTOS release, all possible new services that this release implements are disabled per default.
Default:
Safe mode is disabled per default.
Example:
[DEVICE]
SAFEMODE=1
Since
V0.80


[DEVICE]
DRIVEA_DATA_CRC=0/1

Disable (0) / Enable (1) the checking of the data CRC when reading files on drive A:. If this setting is enabled, the "chk_data_crc" mount option is used when mounting the UBIFS drive A: volume. This switches the data verification on, which is disabled by default to improve the read speed. Turning this option on decreases UBIFS read speed a little, but provides better integrity protection. See here for more details about the UBIFS Checksumming option.
Default:
The checking of the data CRC is disabled by default.
Example:
[DEVICE]
DRIVEA_DATA_CRC=1
Since
V1.21
Only supported at @CHIP-RTOS-LNX target(s)
SC1x5





Top of page | Main page

Copyright © 2018 Beck IPC GmbH
Generated on Fri Jun 8 2018 12:48:20 by Doxygen 1.8.13