graphic%u0020with%u0020the%u0020ipc@chip^® 

You will find on this site all information, software and tools which are required to start-up with the IPC@CHIP^®.

Documentation:

Manual CoDeSys@CHIP Target Visualisation Getting Started V1.01 First steps for a convenient entry into Target Visualisation with the CoDeSys@CHIP SDK on the IPC@CHIP®. 26.11.2008 fk61_gc01_startup_codesysatchip_v101.pdf 996,57 KB GC01 Hardware Manual This is the hardware manual for the GC01 Graphics Controller. 19.06.2008 gc01hw_v120.pdf 528,04 KB Getting Started FK61-GC01 This document will show you how to get started with the FK61-GC01. It provides a step-by-step guide on how to put the FB60-GC01 into operation and also contains instructions on how to start developing your own HMI application. 19.06.2008 getting_started_fk61_gc01_v10.pdf 1,0 MB Datasheet GC01 Datasheet This is the datasheet for the GC01 including pin description and mechanical dimension. 11.06.2008 ds_gc01_v1.pdf 108,16 KB Circuit diagram FB60-GC01 Ciruit Diagram v 03.2008 13.08.2008 cd_fb60-gc01_032008.pdf 157,86 KB Application Notes ChipForms This application note describes the ChipForms class library. The ChipForms library offers object oriented programming of Graphical User Interfaces (GUI). 19.06.2008 an_chipforms.pdf 529,07 KB chipforms_v104.zip 112,20 KB

Software:

SCxxx-Konfiguration, Telnet und FTP Client, Source Level Remote Debugger Tool und IDE-Treiber für das betreiben einer Compactflash. Tools GCLIB File Converter (GcConverter) Use this tool to convert graphic files to the speed-optimized Beck graphic file formats. 19.06.2008 setup_gcconverter.exe 1,3 MB examples GcDemo This program demonstrates the main features of the IPC@CHIP® Graphics Controllers. It is deployed on your DK60 Development Board during the Getting Started progress. Since the source code is included, you can also use this program as an example for your own HMI applications. 03.11.2008 gcdemo_v106.zip 3,5 MB GCLIB Touch Panel Calibration Tool Each touch panel has to be calibrated once. This tool will be used during the Getting Started procedure to calibrate the touch panel of the FB60-GC01. As the source code is included, you can also use this tool as the basis for your own touch panel calibration tool, which you can provide to your customers. 03.11.2008 touchcal_v111.zip 34,29 KB Libraries GCLIB Graphics Library and API documentation This setup will install the GCLIB Graphics Library and the API documentation on your computer. 03.11.2008 setup_gclib.exe 355,60 KB