 |
|
Processors
SC23
SC23, SC23-IEC
|
- Embedded Web-Controller with powerful 96 MHz processor for demanding control and communication tasks
- Easy handling due to DIL32 module configuration
- Large memory capacity with 8 MB RAM and 2 MB Flash
- Industrial temperature range
- 3 serial interfaces (RS232)
- 1 x Ethernet (10/100BaseT Phy)
- 2 x CAN 2.0
- USB host or device
- 17 GPIOs
- Simple expansion via SPI and I2C
- RTOS Real-time multi-tasking Operating System with TCP/IP, web-server and security protocols
- IEC-version with CoDeSys-licence available
- Package units 10
|
| Product |
Order no |
|
|
|
|
SC23
|
553944 |
|
|
|
|
SC23-IEC
Incl. CoDeSys License
|
553945 |
|
|
|
* Price excluding 19% Value Added Tax
| Processor |
SC186EX/96 MHz |
|
| Working memory (RAM) |
8 MB |
|
| Flash Memory (disk) |
2 MB (1 MB) |
|
| Serial |
3x TTL/RS232, 4-wire with DMA |
|
| Ethernet |
1x10/100BaseT |
|
| USB |
USB1.1 |
|
| CAN |
2 x CAN2.0b |
|
| I/O |
17 PIO |
|
| Power dissipation |
typ. 1W / max. 1,3W |
|
| Operating system |
RTOS |
|
| CoDeSys |
SC23-IEC |
|
| Housing |
DIL32 (20 mm x 42,3 mm x 12 mm) |
|
|
SC23
CPU
RTOS Run Time licence
|
SC23-IEC
CPU
RTOS Run Time licence
CoDeSys Run Time licence
|
|
|
|
Infosheet |
|
|
|
IPC@CHIP® SC2x |
12.11.2007 |
|
 is_sc2x_de_v3.pdf |
 |
43,12 KB |
|
is_sc2x_en_v3.pdf |
 |
42,59 KB |
|
| |
|
|
|
IPC@CHIP® on board |
23.01.2006 |
|
is_ipc_onboard_de_v3.pdf |
|
304,74 KB |
|
is_ipc_onboard_en_v3.pdf |
|
301,35 KB |
|
is_ipc_onboard_fr_v3.pdf |
 |
346,91 KB |
|
| |
|
|
|
Profitability of IPC@CHIP® Applications |
27.06.2005 |
|
is_profitability_de_v3.pdf |
|
108,41 KB |
|
is_profitability_en_v3.pdf |
|
108,03 KB |
|
is_profitability_fr_v3.pdf |
|
108,81 KB |
|
|
|
Manual |
|
|
|
IPC@CHIP® RTOS API Documentation [Build 16.02.2009]
The documentation of the RTOS API below is intended to be used for all members of the IPC@CHIP® family SC11/12/13/123/143/SC23. Every function contains the indication for which IPC@CHIP® controller and from which RTOS version on the function is valid. |
20.02.2009 |
|
ipcatchip_rtos_documentation_build_090216.pdf |
|
8,6 MB |
|
 index.htm |
|
3,45 KB |
|
| |
|
|
|
SC2x Hardware manual
Hardware manual version 1.2 for SC2x - [Build 09.04.14] |
14.04.2009 |
|
sc2xhw_v12_090414.pdf |
|
591,12 KB |
|
| |
|
|
|
UDP Configuration Server Protocol Specification
Specification of the UDP Configuration Server Protocol. The configuration server provides means to find and configure IPC@CHIP®s on the network. |
30.08.2007 |
|
udp-configurationserverprotocolspecification.pdf |
|
246,61 KB |
|
| |
|
|
|
Update to C-Lib V2.16 / @CHIP-RTOS documentation [Build 29.04.2008]
Paradigm Users: Run this setup after the Paradigm compiler installation. It automatically updates the Paradigm Beck IPC Edition with the latest CLIB binaries and @CHIP-RTOS/CLIB documentation.
Borland Users: Run this setup and choose the directories, where to install the CLIB binaries and @CHIP-RTOS/CLIB documentation. |
20.02.2009 |
|
 updatedocu090216_clib216.exe |
|
1,2 MB |
|
clibv216_releasenotes.pdf |
|
49,89 KB |
|
|
|
Datasheet |
|
|
|
SC2x Datasheet
Datasheet IPC@CHIP® SC2x |
19.11.2008 |
|
ds_sc2x_v6.pdf |
|
41,60 KB |
|
|
|
Circuit diagram |
|
|
|
Eagle components library version 1.1.2 |
04.02.2008 |
|
 beck_v3.lbr |
|
53,11 KB |
|
|
|
Application Notes |
|
|
|
Programming in C++ version 2.0
References and recommandations regarding programming in C++ on the IPC@CHIP® Controller |
31.01.2006 |
|
an_cpp_v2.pdf |
|
214,85 KB |
|
 an_cpp_2005_01_18.zip |
|
83,31 KB |
|
| |
|
|
|
Character Display and SC1x3
Attach a standard HD44780 compatible character display to the SC1x3 via the I2C bus. |
29.03.2007 |
|
an_display-sc1x3.pdf |
|
55,85 KB |
|
an_display_sc1x3.zip |
|
689,97 KB |
|
| |
|
|
|
Realisation of a PLC based on the SC1x3-IEC and Sc23-IEC Controller |
18.09.2008 |
|
an_plc.pdf |
|
115,75 KB |
|
an_plc.zip |
|
4,5 MB |
|
| |
|
|
|
IO expander for the SC23
Attach a PCF8574 to the SC23 via the I2C bus |
02.10.2007 |
|
an_sc23-gpio-expander.pdf |
|
39,06 KB |
|
| |
|
|
|
Connecting the IPC@CHIP® to a Database |
10.02.2006 |
|
an_sqlatchip.pdf |
|
312,95 KB |
|
an_sqlatchip.zip |
|
330,79 KB |
|
|
|
Product Change Notifications |
|
|
|
Product Change Notification
200903B-01 - SC2x @CHIP RTOS Revision 1.22 |
09.03.2009 |
|
beck_pcn_200903b_01.pdf |
|
28,97 KB |
|
|
|
|
RTOS |
|
|
|
SC2x @CHIP-RTOS version 1.23
The ZIP file contains the SC2x RTOS for the IPC@CHIP® SC2x and the
corresponding release notes. |
20.02.2009 |
|
 sc2xv0123.zip |
|
693,29 KB |
|
sc2xv0123_releasenotes.pdf |
|
108,89 KB |
|
|
|
Tools |
|
|
|
Paradigm C/C++ Beck IPC Edition Compiler for IPC@CHIP® version 7.00.042
A USB hardware license key provided within the delivery scope of the Paradigm C/C++ Beck Edition compiler is required to install Paradigm C/C++. |
07.01.2009 |
|
beckeditionbuild42.exe |
|
45,8 MB |
|
| |
|
|
|
ChipControl DLL version 2.0.3.0
The ChipControl DLL is an implementation of the UDP configuration server protocol. It provides the functionality of the CHIPTOOL (such as network scan, ip configuration) in a DLL design. So customer specific windows applications could use the DLL to get access to CHIPTOOLs features. The archive contains a simple windows console application which demonstrates how to use the DLL. |
13.06.2008 |
|
chipcontrolv2_0_3_0.zip |
|
238,15 KB |
|
| |
|
|
|
CHIPtool version 6.0.40.0
The CHIPtool software allows configuration of the IPC@CHIP® controller within the network, the download of new @CHIP-RTOS and the generation of a complete software image for series programming. This version now includes a FTP and a Telnet client. |
02.06.2009 |
|
chiptool_install_v6.0.4.0.exe |
|
1,4 MB |
|
chiptool_releasenotes_v6.0.4.0.pdf |
|
370,27 KB |
|
| |
|
|
|
CoDeSys v2.3 programming system for IPC@CHIP® version 2.3.9.9
3S CoDeSys programming system. This package contains the complete Windows installation. System requirements: Windows 2000 / XP.
Update recommended. |
26.11.2008 |
|
codesys_v2399.exe |
|
130,0 MB |
|
| |
|
|
|
CoDeSys@CHIP-SDK V1.01
This package allows to adapt the CoDeSys Windows programming system and the run time system (running on the IPC@CHIP®). It enables the CoDeSys programming environment to gain full access to the IPC@CHIP® hardware and software functionalities required by your application. Use this package to create your own IPC@CHIP® based CoDeSys programmable controller. |
09.08.2005 |
|
codesysatchip-sdk-v1_01.exe |
|
7,1 MB |
|
| |
|
|
|
Debug@CHIP Version 1.09
Debug@CHIP for Windows NT/2000/XP is a Source Level Remote Debugger for the target CPU's SC11/SC12/SC13/SC123/SC143. The debugger supports tracing, watches, breakpoints for Borland C and Paradigm C applications.
For further information are inside the documentation DEBUGATCHIP_USER_GUIDEV105.PDF. |
12.03.2008 |
|
debugatchip_install_v109.exe |
|
2,1 MB |
|
debugatchip_user_guide_v105.pdf |
|
560,01 KB |
|
| |
|
|
|
Format IPC@CHIP® SC2x
FORMAT_SC2x.Hex is a Intel-Hex file. To erase the contents of the flash disk, transfer this file to the IPC@CHIP® over the serial bootstrap loader with the chiptool software.
Please read the readme.txt file. |
20.06.2009 |
|
format_sc2x.zip |
|
24,38 KB |
|
| |
|
|
|
Postmake version 2.5.9.0
Postmake is a small tool, which finishes IPC@CHIP® executables, which are built either with the Paradigm C++ Beck Edition or Borland C++ IDE. The tool is invoked by the IDE each time a project has been successfully build. Postmake can then pack the executable file using UPX, transfer it to the IPC@CHIP® via FTP and start it by telecontrolling a terminal program. |
05.05.2009 |
|
setup_postmake2_v2590.exe |
|
1,0 MB |
|
| |
|
|
|
Registry update for CoDeSys v2.3
For a successful communication of CoDeSys with the FULL RTS via TCP/IP, the default buffer size must be set to 32 KB. Execute this registry update to adjust the setting. |
14.05.2007 |
|
add_tcp_driver_settings_full_rts.zip |
|
402,00 Bytes |
|
| |
|
|
|
CoDeSys@CHIP-SDK Edition 11.2008
This package allows to adapt the CoDeSys Windows programming system and the run time system (running on the IPC@CHIP®). It enables the CoDeSys programming environment to gain full access to the IPC@CHIP® hardware and software functionalities required by your application, inclusive the Multi-Tasking features of the @CHIP-RTOS. Use this package to create your own IPC@CHIP® based CoDeSys programmable controller. |
26.11.2008 |
|
codesysatchip_sdk_edition_11_2008.exe |
|
23,6 MB |
|
|
|
examples |
|
|
|
BIOS Application Programming Interface
MyStdio - Example for the use of a user defined Stdio channel using a TCP connection. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
UserPersistentData - Example to read and write user persistent data that are stored in a RTOS and file system independent memory area ( user persistent flash data ). | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
|
03.06.2009 |
|
bios_v3.01.zip |
|
32,09 KB |
|
| |
|
|
|
CGI - Common Gateway Interface
Cookies - This example shows how CGI functions could create and handle cookies. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
CountCGI - Example demonstrating how a CGI page is installed which contains a dynamic counter. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
DB54CGI - Example demonstrating how to control and view the digital I/Os and the LC display of the the DB54. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
DKxxCGI - Example demonstrating how to control and view the digital I/O’s of the DK40, DK50 and DK60 | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
ErrCGI - Example demonstrates how a CGI handler can be installed for HTTP error codes, e.g. 404. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
FileUpload - This HTML page shows how to transfer files to the IPC@CHIP® using the HTTP put method. Requires a special RTOS available on demand. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
MiniCGI - Small example clarifying the use of CGI on the IPC@CHIP®. The installed CGI page returns the remote IP address. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
MyMIME - Example shows how custom MIME types can be installed for the IPC@CHIP® webserver. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
Secure - Example installing a CGI page which can only be accessed by means of a username and a password. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
SSIPage - Example using ServerSideInclude API functions. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
Submit - Example using forms within a CGI function. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
Submitp - Example using forms within a CGI function with POST method. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
SVGGraph - This example shows how to create an SVG (scalable vector graphic) within a CGI function. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
|
03.06.2009 |
|
cgi_v3.01.zip |
|
2,8 MB |
|
| |
|
|
|
External Memory
EXTCALL - Demonstration of callback functionality for external memory. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
EXTIDE Driver - Example for mounting compact flash cards. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
EXTSD-Driver - Example for mounting MMC/SD cards (via SPI). | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
EXTSPI Driver - Example for mounting an SPI flash memory (via software SPI, with circuit diagram). | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
EXTUSB Driver - Example for mounting USB mass storage devices (e.g. USB memory sticks). | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
FDISK - Tool for partitioning media connected to the IPC@CHIP®. | Hardware Platform: | | SC11 | SC12 | SC13 | SC123 | SC143 | SC23 | SC24 | SC243 |
|
|
|
02.06.2009 |
|
extdisk_v3.01.zip |
|
298, | | | | | |
Top of page
