 |
|
Processors
SC123-LF
SC123-LF, SC123-IEC-LF
|
- Embedded Web-Controller with powerful 96 MHz processor for demanding control and communication tasks
- Compact, production-optimized BGA177 housing for use in medium to large numbers
- Large memory capacity with up to 8 MB RAM and up to 2 MB Flash
- 2 x Ethernet (1x10/100BaseT Phy , 1xMII)
- CAN 2.0
- USB host and device
- 34 GPIOs
- Simple expansion via SPI and I2C and 16-bit address/data bus
- RTOS Real-time multi-tasking Operating System with TCP/IP, web-server and security protocols
- Unlimited use of CoDeSys SP@CHIP in the IEC products included
- Package unit 48
|
| Product |
Order no |
|
|
|
|
SC123-LF
RoHS compliant version, SC123 compatible
|
543257 |
| 45,00 Euro* |
1000 |
| 33,00 Euro* |
5000 |
|
|
|
|
SC123-IEC-LF
RoHS compliant version, SC123 compatible
|
543259 |
| 51,00 Euro* |
1000 |
| 39,00 Euro* |
5000 |
|
|
|
* Price excluding 19% Value Added Tax
| Processor |
SC186EX/96 MHz |
|
| Working memory (RAM) |
8 MB |
|
| Flash Memory (disk) |
2 MB (1 MB) |
|
| Serial |
4x TTL, 4-wire with DMA |
|
| Ethernet |
1x10/100BaseT, 1xMII |
|
| USB |
USB1.1 |
|
| CAN |
2 x CAN2.0b |
|
| I/O |
31 PIO, Intel AD-Bus |
|
| Power dissipation |
typ. 1W / max. 2W |
|
| Operating system |
RTOS |
|
| CoDeSys |
SC123-IEC |
|
| Housing |
BGA177 (25x25 x 5 mm) |
|
|
SC123-LF
CPU
RTOS Run Time licence
|
SC123-IEC-LF
CPU
RTOS Run Time licence
CoDeSys Run Time licence
|
|
|
|
Infosheet |
|
|
|
IPC@CHIP® SC123 / SC143 |
18.10.2006 |
|
 is_ipc_sc123_de_v7.pdf |
 |
52,37 KB |
|
is_ipc_sc123_en_v7.pdf |
 |
52,13 KB |
|
is_ipc_sc123_fr_v7.pdf |
 |
43,02 KB |
|
| |
|
|
|
IPC@CHIP® on board |
23.01.2006 |
|
is_ipc_onboard_de_v3.pdf |
|
304,74 KB |
|
is_ipc_onboard_en_v3.pdf |
|
301,35 KB |
|
is_ipc_onboard_fr_v3.pdf |
|
346,91 KB |
|
| |
|
|
|
Profitability of IPC@CHIP® Applications |
27.06.2005 |
|
is_profitability_en_v2.pdf |
|
199,91 KB |
|
is_profitability_fr_v2.pdf |
|
145,33 KB |
|
is_wirtschaftlichkeit_de_v2.pdf |
|
200,96 KB |
|
| |
|
|
|
RoHS Certificate of Compliance |
07.08.2006 |
|
rohs_certificate_v2.pdf |
|
33,93 KB |
|
|
|
Manual |
|
|
|
IPC@CHIP® SC123/SC143 Getting started v1.5
This document explains how the IPC@CHIP® SC123/SC143 is put into operation. The DK60 evaluation board is used through this manual. |
05.06.2007 |
|
ipcatchip_gettingstart_dk61_v15.pdf |
|
941,45 KB |
|
| |
|
|
|
IPC@CHIP® RTOS API Documentation [Build 29.04.2008]
The documentation of the RTOS API below is intended to be used for all members of the IPC@CHIP® family SC11/12/13/123/143/SC23. Every function contains the indication for which IPC@CHIP® controller and from which RTOS version on the function is valid. |
30.04.2008 |
|
ipcatchip_rtos_documentation_build_080429.pdf |
|
9,6 MB |
|
| |
|
|
|
SC1x3 Hardware manual
Hardware manual version 1.04 for SC123 and SC143 - [Build 07.12.20] |
19.06.2008 |
|
sc1x3hw_v104_080609.pdf |
|
2,6 MB |
|
| |
|
|
|
UDP Configuration Server Protocol Specification
Specification of the UDP Configuration Server Protocol. The configuration server provides means to find and configure IPC@CHIP®s on the network. |
30.08.2007 |
|
udp-configurationserverprotocolspecification.pdf |
|
246,61 KB |
|
| |
|
|
|
Update to C-Lib V2.15 / @CHIP-RTOS documentation [Build 29.04.2008]
Paradigm Users: Run this setup after the Paradigm compiler installation. It automatically updates the Paradigm Beck IPC Edition with the latest CLIB binaries and @CHIP-RTOS/CLIB documentation.
Borland Users: Run this setup and choose the directories, where to install the CLIB binaries and @CHIP-RTOS/CLIB documentation. |
30.04.2008 |
|
 updatedocu080429_clib215.exe |
|
1,2 MB |
|
clibv215_releasenotes.pdf |
|
40,03 KB |
|
|
|
Datasheet |
|
|
|
SC123/SC143 Datasheet
Datasheet SC123/SC143 |
29.10.2007 |
|
ds_sc123-sc143_v5.pdf |
|
212,06 KB |
|
|
|
Circuit diagram |
|
|
|
Eagle components library version 1.1.2 |
04.02.2008 |
|
 beck_v3.lbr |
|
53,11 KB |
|
| |
|
|
|
SC1x3 E-CAD Symbols
Schematic and Layout Symbols for Mentor Board Station, Eagle and CADES-G |
19.09.2005 |
|
 mcm_beck_sc123_mentor.zip |
|
78,69 KB |
|
sc123.cda |
|
326,51 KB |
|
sc123_add.lbr |
|
17,97 KB |
|
|
|
Application Notes |
|
|
|
Programming in C++ version 2.0
References and recommandations regarding programming in C++ on the IPC@CHIP® Controller |
31.01.2006 |
|
an_cpp_v2.pdf |
|
214,85 KB |
|
an_cpp_2005_01_18.zip |
|
83,31 KB |
|
| |
|
|
|
Character Display and SC1x3
Attach a standard HD44780 compatible character display to the SC1x3 via the I2C bus. |
29.03.2007 |
|
an_display-sc1x3.pdf |
|
55,85 KB |
|
an_display_sc1x3.zip |
|
689,97 KB |
|
| |
|
|
|
Floating Point Coprozessor for the SC1x3
As part of a thesis at the technical university of Giessen-Freidberg, a FPGA-based Floating Point Coprozessor for the IPC@CHIP® SC1x3 has been developped. |
19.11.2007 |
|
an_floatingpoint-sc1x3.pdf |
|
41,44 KB |
|
an_floatingpoint_sc1x3_thesis.pdf |
|
2,0 MB |
|
an_floatingpoint_sc1x3.zip |
|
445,81 KB |
|
| |
|
|
|
UNIGATE IC Profibus
How to use the PROFIBUS function kit from Deutschmann Automation GmbH & Co. KG on the DK60 |
11.06.2008 |
|
an_dk60-unigate_example_v11.pdf |
|
317,66 KB |
|
an_dk60-unigate_example_v11.zip |
|
1,5 MB |
|
| |
|
|
|
JTAG/Boundary Scan
JTAG/Boundary Scan for SC1x3 (IEEE 1149.1) |
06.03.2007 |
|
an_sc123-jtag_v2.pdf |
|
49,53 KB |
|
an_bsdl.zip |
|
3,37 KB |
|
| |
|
|
|
Packaging Method and Handling
Explanation of the Packaging Method and Handling of SC1x3 Products. |
17.10.2005 |
|
an_sc1x3-packaging.pdf |
|
426,20 KB |
|
| |
|
|
|
Design Guide for SC1x3
Design guidelines for SC1x3 hardware. Troubleshooting and hints. Tips for debugging and recommendations for layouts. |
08.11.2007 |
|
an_sc1x3_design_guide_v10.pdf |
|
171,10 KB |
|
| |
|
|
|
IEC61131-2 compatible inputs and outputs at SC1x3
This application note describes how to attach IEC61131-2 compatible inputs and output to the SC1x3 PIO pins |
29.03.2007 |
|
an_sc1x3-io.pdf |
|
111,99 KB |
|
| |
|
|
|
FRAM
Interfacing a Ferroelectric Nonvolatile RAM (FRAM) via SPI to the SC1x3 |
11.12.2006 |
|
an_spi-fram.pdf |
|
136,25 KB |
|
an_spi_fram.zip |
|
173,66 KB |
|
| |
|
|
|
Connecting the IPC@CHIP® to a Database |
10.02.2006 |
|
an_sqlatchip.pdf |
|
312,95 KB |
|
an_sqlatchip.zip |
|
330,79 KB |
|
| |
|
|
|
Testsoftware for SC123 und SC143
Software package with testsoftware routines for the SC1x3 Controller family |
22.08.2006 |
|
an_testsoftware-sc1x3.pdf |
|
57,64 KB |
|
test_can_sc1x3.zip |
|
25,99 KB |
|
test_hw_sc1x3.zip |
|
37,88 KB |
|
|
|
Product Change Notifications |
|
|
|
Product Change Notification
PCN200701 - @CHIP RTOS Revision 1.10 |
23.10.2007 |
|
beck_pcn_200701_02.pdf |
|
23,29 KB |
|
| |
|
|
|
Product Change Notification
PCN200704 - EOL Notification leaded CHIP SC123 |
26.10.2007 |
|
beck_pcn_200704_02.pdf |
|
232,64 KB |
|
| |
|
|
|
Product Change Notification
PCN200712 - SC1x3 Hardware Revision H02 |
20.12.2007 |
|
beck_pcn_200712_01.pdf |
|
26,55 KB |
|
| |
|
|
|
Product Change Notification
PCN200807 - SC1x3 H02 – FR4 Laminate |
13.05.2008 |
|
beck_pcn_200807_01.pdf |
|
22,67 KB |
|
|
|
|
RTOS |
|
|
|
SC1x3 @CHIP-RTOS version 1.22
The ZIP file contains the SC1x3 RTOS for the IPC@CHIP® SC123/SC143
and the release notes with differences to previous SC1x3 @CHIP-RTOS versions. |
30.04.2008 |
|
 sc1x3v0122.zip |
|
713,29 KB |
|
sc1x3v0122_releasenotes.pdf |
|
146,88 KB |
|
|
|
Tools |
|
|
|
Paradigm C/C++ Beck IPC Edition Compiler for IPC@CHIP® version 7.00.039
A USB hardware license key provided within the delivery scope of the Paradigm C/C++ Beck Edition compiler is required to install Paradigm C/C++. |
27.02.2008 |
|
beckeditionbuild39.exe |
|
40,4 MB |
|
| |
|
|
|
ChipControl DLL version 2.0.3.0
The ChipControl DLL is an implementation of the UDP configuration server protocol. It provides the functionality of the CHIPTOOL (such as network scan, ip configuration) in a DLL design. So customer specific windows applications could use the DLL to get access to CHIPTOOLs features. The archive contains a simple windows console application which demonstrates how to use the DLL. |
13.06.2008 |
|
chipcontrolv2_0_3_0.zip |
|
238,15 KB |
|
| |
|
|
|
CHIPtool Version V5.10.0.1
The CHIPtool software allows configuration of the IPC@CHIP® controller within the network, the download of new @CHIP-RTOS and the generation of a complete software image for series programming. This version now includes a FTP and a Telnet client. |
27.06.2007 |
|
chiptool_install_v5.10.0.1.exe |
|
1,2 MB |
|
chiptool_releasenotes_v5.10.0.1.pdf |
|
338,81 KB |
|
| |
|
|
|
CoDeSys v2.3 programming system for IPC@CHIP® version 2.3.9.7
3S CoDeSys programming system. This package contains the complete Windows installation. System requirements: Windows 2000 / XP.
Update required for SC123 and SC143. |
20.08.2008 |
|
codesys_v2397.exe |
|
122,4 MB |
|
| |
|
|
|
CoDeSys@CHIP-SDK V1.01
This package allows to adapt the CoDeSys Windows programming system and the run time system (running on the IPC@CHIP®). It enables the CoDeSys programming environment to gain full access to the IPC@CHIP® hardware and software functionalities required by your application. Use this package to create your own IPC@CHIP® based CoDeSys programmable controller. |
09.08.2005 |
|
codesysatchip-sdk-v1_01.exe |
|
7,1 MB |
|
| |
|
|
|
Debug@CHIP Version 1.09
Debug@CHIP for Windows NT/2000/XP is a Source Level Remote Debugger for the target CPU's SC11/SC12/SC13/SC123/SC143. The debugger supports tracing, watches, breakpoints for Borland C and Paradigm C applications.
For further information are inside the documentation DEBUGATCHIP_USER_GUIDEV105.PDF. |
12.03.2008 |
|
debugatchip_install_v109.exe |
|
2,1 MB |
|
debugatchip_user_guide_v105.pdf |
|
560,01 KB |
|
| |
|
|
|
Format IPC@CHIP® SC1x3
FORMAT_SC1x.Hex and FORMAT_SC1x3.hex are Intel-Hex files.
To erase the contents of the flash disk, transfer these files to the IPC@CHIP
over the serial bootstrap loader with the chiptool software.
Please read the readme.txt file. |
18.05.2006 |
|
format_sc1x3.zip |
|
24,39 KB |
|
| |
|
|
|
Postmake version 2.5.8.0
Postmake is a small tool, which finishes IPC@CHIP® executables, which are built either with the Paradigm C++ Beck Edition or Borland C++ IDE. The tool is invoked by the IDE each time a project has been successfully build. Postmake can then pack the executable file using UPX, transfer it to the IPC@CHIP® via FTP and start it by telecontrolling a terminal program. |
18.07.2008 |
|
setup_postmake2_v2580.exe |
|
1.002,13 KB |
|
| |
|
|
|
Registry update for CoDeSys v2.3
For a successful communication of CoDeSys with the FULL RTS via TCP/IP, the default buffer size must be set to 32 KB. Execute this registry update to adjust the setting. |
14.05.2007 |
|
add_tcp_driver_settings_full_rts.zip |
|
402,00 Bytes |
|
| |
|
|
|
CoDeSys@CHIP-SDK Edition 10.2007 Release
This package allows to adapt the CoDeSys Windows programming system and the run time system (running on the IPC@CHIP®). It enables the CoDeSys programming environment to gain full access to the IPC@CHIP® hardware and software functionalities required by your application. Use this package to create your own IPC@CHIP® based CoDeSys programmable | | | | | |
Top of page
