 |
|
Starter kits
DK61
|
Complete development kit for SC123 and SC143. Consists of DK60 Development board including the SC143-IEC-LF, Paradigm C/C++ compiler on CD, CoDeSys CD, IEC61850Li CD, serial & USB cable, ethernet patch cable, cross over cable, sd card and power supply, packed in a systainer. RoHS compliant.
» More
The IPC@CHIP ® DK61 Development Kit is a complete development system for the new IPC@CHIP ® SC123 and SC143 Embedded Controllers.
In addition to the DK60 Development Board it also contains the Paradigm C/C++ Compiler with the IPC@CHIP® RTOS Debugger and many other tools required for creating C applications on the SC123 and SC143 Embedded Controllers. Despite the powerful hardware features of the Development Board, providing all the interfaces of the SC123 and SC143, commissioning can be carried out easily in a few minutes thanks to the pre-installed RTOS and the supplied "First Steps" guide.
The extensive hardware and software features enable customized applications to be developed quickly and efficiently.
Programming and debugging are carried out via Ethernet as standard, and are also possible via RS232 or USB.
The CoDeSys IEC 61131-3 software development kit for developing custom IEC 61131-3 PLC applications on the SC123/SC143 will be available from January 2006 as a developer version and can then be downloaded from the Internet free of charge.
IEC 61850Li (Lite implementation) integrated
The IEC-61850-compliant PIS-10 software stack
can be launched as a client and as a server. Both
applications can coexist at the same time on the
IPC@CHIP®. The stack supports IEC 61850 services
including GOOSE and sampled values.
DK61 Development Kit
The DK61 contains all the hardware and software components required for the fast development of custom applications:
- DK60 Development Board
- Paradigm C/C++ Compiler (Beck IPC edition for IPC@CHIP®), RTOS Remote Debugger and other tools
- CoDeSys IEC 61131-3 SDK for SC123/SC143 (from January 2006)
- IEC 61850 stack (Client/Server, GOOSE) and
a configuration Tool based on SCL
- 100-240V / 24V plug-in power supply unit for DK60 (with adapters for international use)
- 2 PC programming cable (RS232 and USB)
- Practical systainer
DK60 Development Board
- SC143-IEC Embedded Controller (96 MHz, 8 MB RAM, 8 MB Flash)
- 2 x RS232 (Sub-D socket)
- 2 x RS232/TTL (connector)
- 1 x USB1.1 (can be configured as host or device)
- 2 x CAN 2.0b
- 1 x SPI, 1 x I²C-Bus
- 2 x Ethernet 100Base-T
|
|
- MMC/SD and Compact Flash socket
- I/O port with LED's and DIP switch
- Extension port for custom hardware expansions
- Directly programmable I/O pins with LED indication
- Power Fail and Reset buttons
- Power supply, 24 VDC input
|
|
| Product |
Order no |
|
|
|
|
DK61
Development Kit for SC123 and SC143
|
542750 |
|
 |
|
* Price excluding 19% Value Added Tax
| Processor |
SC143-IEC-LF |
|
| Dimensions (L*W*H) |
201mm x 150mm x 18mm (+/-1 mm) |
|
| Design |
Printed circuit board |
|
| Input voltage / Power dissipation |
24 V DC / 3 W |
|
| Interfaces |
2x 10/100BaseT Ethernet; 2x CAN 2.0B; 4x Serial (2x RS232); USB1.1; SPI; I2C |
|
| Special functions |
CF Card Interface; MMC/SD Card Interface |
|
|
DK61
Development board
CPU (RoHS compliant)
RTOS Run Time licence
CoDeSys Run Time licence
Paradigm CD
CoDeSys CD
Null-modem cable
USB cable
Ethernet patch cable
Ethernet cross over cable
SD card
Power supply
Systainer
|
|
|
|
Infosheet |
|
|
|
IPC@CHIP® DK61 |
27.04.2010 |
|
 is_dk61_de_v6.pdf |
 |
193,08 KB |
|
is_dk61_en_v6.pdf |
 |
192,79 KB |
|
|
|
Manual |
|
|
|
DK60 Hardware manual version 1.2 - Build 21.08.2008
DK60 Hardware manual |
21.08.2008 |
|
dk60_manual_v120_20080821.pdf |
|
587,32 KB |
|
| |
|
|
|
Getting Started with DK61 and IEC 61850 |
27.05.2010 |
|
getting_started_dk61_iec61850_v10.pdf |
|
1,4 MB |
|
| |
|
|
|
IPC@CHIP® SC123/SC143 Getting started v1.5
This document explains how the IPC@CHIP® SC123/SC143 is put into operation. The DK60 evaluation board is used through this manual. |
05.06.2007 |
|
ipcatchip_gettingstart_dk61_v15.pdf |
|
941,45 KB |
|
|
|
Datasheet |
|
|
|
DK60 Datasheet version 3
Datasheet of the development board DK60 |
03.11.2006 |
|
ds_dk60_v3.pdf |
|
66,62 KB |
|
|
|
Circuit diagram |
|
|
|
DK60 Circuit Diagram v 1.3
Circuit diagram of DK60 |
03.11.2006 |
|
cd_dk60_v13.pdf |
|
1,5 MB |
|
dk60_parts_list_070313.pdf |
|
101,93 KB |
|
|
|
Leaflet |
|
|
|
DK61
Supplementary sheet DK61 - Important notes. Version 0.4 (H03) |
07.04.2006 |
|
supplementary_sheet_dk61_v040.pdf |
|
180,94 KB |
|
supplementary_sheet_dk61_v040.pdf |
|
180,94 KB |
|
|
|
Application Notes |
|
|
|
Character Display and SC1x3
Attach a standard HD44780 compatible character display to the SC1x3 via the I2C bus. |
29.03.2007 |
|
an_display-sc1x3.pdf |
|
55,85 KB |
|
 an_display_sc1x3.zip |
|
689,97 KB |
|
| |
|
|
|
Description of the CPLD functionality
Description of the CPLD functionality on the DK60 |
01.12.2005 |
|
an_dk60-cpld_v3.pdf |
|
57,75 KB |
|
an_dk60_cpld_v03.zip |
|
11,66 KB |
|
| |
|
|
|
UNIGATE IC Profibus
How to use the PROFIBUS function kit from Deutschmann Automation GmbH & Co. KG on the DK60 |
11.06.2008 |
|
an_dk60-unigate_example_v11.pdf |
|
317,66 KB |
|
an_dk60-unigate_example_v11.zip |
|
1,5 MB |
|
| |
|
|
|
IEC61131-2 compatible inputs and outputs at SC1x3
This application note describes how to attach IEC61131-2 compatible inputs and output to the SC1x3 PIO pins |
29.03.2007 |
|
an_sc1x3-io.pdf |
|
111,99 KB |
|
| |
|
|
|
Audio Extension for the SC1x3 Controller
Thesis |
17.09.2008 |
|
thesis_audiofunctionboard.pdf |
|
1,1 MB |
|
thesis_audiofunctionboard_briefoverview.pdf |
|
186,52 KB |
|
thesis_audiofunctionboard_programcode.pdf |
|
608,39 KB |
|
|
|
|
Tools |
|
|
|
Paradigm C/C++ Beck IPC Edition Compiler for IPC@CHIP® version 7.00.045
A USB hardware license key provided within the delivery scope of the Paradigm C/C++ Beck Edition compiler is required to install Paradigm C/C++. |
18.06.2010 |
|
 beckeditionbuild45.exe |
|
54,8 MB |
|
| |
|
|
|
ChipControl DLL version 2.1.7.0
The ChipControl DLL is an implementation of the UDP configuration server protocol.
It provides the functionality of the @CHIPTOOL (such as network scan, ip configuration, RTOS upgrade) in a DLL design.
So customer specific windows applications could use the DLL to get access to CHIPTOOLs features.
The archive contains a simple windows console application which demonstrates how to use the DLL. |
29.06.2010 |
|
 chipcontrolv2_1_7_0.zip |
|
152,76 KB |
|
| |
|
|
|
CHIPtool version 6.1.2.0
The CHIPtool software allows configuration of the IPC@CHIP® controller within the network, the download of new @CHIP-RTOS and the generation of a complete software image for series programming. This version now includes a FTP and a Telnet client. |
29.06.2010 |
|
chiptool_install_v6.1.2.0.exe |
|
1,3 MB |
|
chiptool_releasenotes_v6.1.2.0.pdf |
|
91,10 KB |
|
| |
|
|
|
CHIPtool version 6.0.7.2
The CHIPtool software allows configuration of the IPC@CHIP® controller within the network, the download of new @CHIP-RTOS and the generation of a complete software image for series programming. This version now includes a FTP and a Telnet client. |
03.11.2009 |
|
chiptool_install_v6.0.7.2.exe |
|
1,3 MB |
|
| |
|
|
|
CoDeSys v2.3 programming system for IPC@CHIP® version 2.3.9.19
3S CoDeSys programming system. This package contains the complete Windows installation. System requirements: Windows 2000 / XP.
Update recommended. |
25.02.2010 |
|
codesys_v23919.exe |
|
133,2 MB |
|
| |
|
|
|
CoDeSys@CHIP-SDK V1.01
This package allows to adapt the CoDeSys Windows programming system and the run time system (running on the IPC@CHIP®). It enables the CoDeSys programming environment to gain full access to the IPC@CHIP® hardware and software functionalities required by your application. Use this package to create your own IPC@CHIP® based CoDeSys programmable controller. |
09.08.2005 |
|
codesysatchip-sdk-v1_01.exe |
|
7,1 MB |
|
| |
|
|
|
Debug@CHIP Version 1.10
Debug@CHIP for Windows is a Source Level Remote Debugger for the target CPU's SC1x/SC2x/SC1x3.
The debugger supports tracing, watches, breakpoints for Borland C and Paradigm C applications.
For further information look inside the User Guide, which is part of this installation. |
06.01.2010 |
|
debugatchip_install_v110.exe |
|
1,6 MB |
|
| |
|
|
|
Postmake version 2.6.3.0
Postmake is a small tool, which finishes IPC@CHIP® executables, which are built either with the Paradigm C++ Beck Edition or Borland C++ IDE. The tool is invoked by the IDE each time a project has been successfully build. Postmake can then pack the executable file using UPX, transfer it to the IPC@CHIP® via FTP and start it by telecontrolling a terminal program. |
15.03.2010 |
|
setup_postmake2_v2630.exe |
|
1.014,76 KB |
|
| |
|
|
|
Registry update for CoDeSys v2.3
For a successful communication of CoDeSys with the FULL RTS via TCP/IP, the default buffer size must be set to 32 KB. Execute this registry update to adjust the setting. |
14.05.2007 |
|
add_tcp_driver_settings_full_rts.zip |
|
402,00 Bytes |
|
| |
|
|
|
CoDeSys@CHIP-SDK Edition 03.2010
This package is an Update to the Edition 12 2009 Release. A critical problem with the Retain Area has been solved. All users of the Release 12 2009 are strongly recommended to switch over to this Update installation.
This package allows to adapt the CoDeSys Windows programming system and the run time system (running on the IPC@CHIP®). It enables the CoDeSys programming environment to gain full access to the IPC@CHIP® hardware and software functionalities required by your application, inclusive the Multi-Tasking features of the @CHIP-RTOS. Use this package to create your own IPC@CHIP® based CoDeSys programmable controller. |
04.05.2010 |
|
codesysatchip_sdk_update_03_2010.exe |
|
22,4 MB |
|
|
|
examples |
|
|
|
DK60 visual representation v1
The state of the I/O of the DK60 can be visually displayed using several methods. |
15.09.2005 |
|
dk60demov1.zip |
|
855,54 KB |
|
| |
|
|
|
IEC 61850 examples
IEC 61850 Client and Server Applivations examples on DK61 |
26.05.2010 |
|
dk61-iec61850_v1-00.zip |
|
2,9 MB |
|
| |
|
|
|
DK61 IEC Plattform example full V1.41
A ready-to-use software package for programming the DK61 using CoDeSys. The belonging source files are included in the CoDeSys@CHIP-SDK. |
04.05.2010 |
|
dk61-iec_platform_full_v1-41.zip |
|
2,3 MB |
|
|
 |
Erste Schritte
- Erste Schritte mit dem IPC@CHIP ®
|
|
Online Demos
- Eine Reihe von Onlinedemos zeigt Beispiele der Möglichkeiten
|
|
IPC@CHIP® RTOS
- Informationen over the operation systems
|
|
|
|
|
|
|
|
|
|
Close info
Top of page
