 |
|
Starter kits
DK51
|
Complete development kit for SC11 and SC13. Consists of DK50 Development board, SC13-IEC, CoDeSys CD, Borland CD, serial cable and power supply, packed in a systainer. RoHS compliant
» More
The IPC@CHIP ® DK51 Development Kit is a complete ready-to-use development system for building applications based on the new Embedded Controller IPC@CHIP ® SC11 and SC13.
The DK51 contains both hardware as well as software components needed in a basic development. The only thing you have to do is to add your application specific add-ons.
All necessary hardware and software functionality’s for the use of Ethernet, compact flash, serial ports, i/o’s and many more important features required for an embedded system are available and well documented enabling
To add your own hardware you have the possibility to connect directly to the 16 bit pre-selected address/data bus of the Embedded Controller. The only thing is to add the according software to the pre-installed RTOS.
It is so easy. Just try it and you get your own application within minutes.
The DK51 comes in a systainer box and consists of a DK50 development board, SC13-IEC Embedded Controller, CoDeSys programming system for IPC@CHIP®, serial cable and AC power supply with interchangeable plugs.
Development Board DK50
The development board integrates all functions, which are necessary to operate the SC13 Embedded Controller:
Example: DK50 Development Board with customer specific extensions.
|
- Single power supply (24 VDC input)
- Two RS232 interfaces (COM and EXT
- 10/100MBit/s Ethernet interface
- Compact Flash Card interface
- 12 programmable I/O pins with LEDs
- Digital extension port with 4 programmable chip selects (16-byte I/O space each)
- Power fail and Reset buttons
- Breadboard area for customer specific extensions
SC13 Embedded Controller
The SC13 Embedded Controller is the latest product of the IPC@CHIP® controller family. The SC13 is a complete single chip solution with an average performance factor of 3 compared to the SC12 Embedded Controller. The SC13 Embedded Controller contains the reliable RTOS Real Time Multitasking operating system.
Software Development Environment
The DK51 contains a complete version of the Borland C++ Development Suite.
|
| Chip socket |
DIL32 (SC11 / SC13) |
|
| Operation power consumption |
24 VDC, 250 mA |
|
| Interfaces |
10/100BaseT Ethernet, 2x RS232, CF-Socket |
|
| Inputs/Outputs |
AD-Bus, PIO-Pins |
|
| Special functions |
I˛C bus, timer output, reset |
|
| Connectors |
DB9, RJ45, Pin headers |
|
|
DK51
Development board
CPU
RTOS Run Time licence
CoDeSys Run Time licence
Borland CD
CoDeSys CD
Null-modem cable
Power supply
Systainer
|
|
|
|
Tools |
|
|
|
Paradigm C/C++ Beck IPC Edition Compiler for IPC@CHIP® version 7.00.039
A USB hardware license key provided within the delivery scope of the Paradigm C/C++ Beck Edition compiler is required to install Paradigm C/C++. |
27.02.2008 |
|
 beckeditionbuild39.exe |
 |
40,4 MB |
|
| |
|
|
|
ChipControl DLL version 2.0.3.0
The ChipControl DLL is an implementation of the UDP configuration server protocol. It provides the functionality of the CHIPTOOL (such as network scan, ip configuration) in a DLL design. So customer specific windows applications could use the DLL to get access to CHIPTOOLs features. The archive contains a simple windows console application which demonstrates how to use the DLL. |
13.06.2008 |
|
 chipcontrolv2_0_3_0.zip |
|
238,15 KB |
|
| |
|
|
|
CHIPtool Version V5.10.0.1
The CHIPtool software allows configuration of the IPC@CHIP® controller within the network, the download of new @CHIP-RTOS and the generation of a complete software image for series programming. This version now includes a FTP and a Telnet client. |
27.06.2007 |
|
chiptool_install_v5.10.0.1.exe |
|
1,2 MB |
|
 chiptool_releasenotes_v5.10.0.1.pdf |
|
338,81 KB |
|
| |
|
|
|
CoDeSys v2.3 programming system for IPC@CHIP® version 2.3.9.7
3S CoDeSys programming system. This package contains the complete Windows installation. System requirements: Windows 2000 / XP.
Update required for SC123 and SC143. |
20.08.2008 |
|
codesys_v2397.exe |
|
122,4 MB |
|
| |
|
|
|
CoDeSys@CHIP-SDK V1.01
This package allows to adapt the CoDeSys Windows programming system and the run time system (running on the IPC@CHIP®). It enables the CoDeSys programming environment to gain full access to the IPC@CHIP® hardware and software functionalities required by your application. Use this package to create your own IPC@CHIP® based CoDeSys programmable controller. |
09.08.2005 |
|
codesysatchip-sdk-v1_01.exe |
|
7,1 MB |
|
| |
|
|
|
Debug@CHIP Version 1.09
Debug@CHIP for Windows NT/2000/XP is a Source Level Remote Debugger for the target CPU's SC11/SC12/SC13/SC123/SC143. The debugger supports tracing, watches, breakpoints for Borland C and Paradigm C applications.
For further information are inside the documentation DEBUGATCHIP_USER_GUIDEV105.PDF. |
12.03.2008 |
|
debugatchip_install_v109.exe |
|
2,1 MB |
|
debugatchip_user_guide_v105.pdf |
|
560,01 KB |
|
| |
|
|
|
Postmake version 2.5.8.0
Postmake is a small tool, which finishes IPC@CHIP® executables, which are built either with the Paradigm C++ Beck Edition or Borland C++ IDE. The tool is invoked by the IDE each time a project has been successfully build. Postmake can then pack the executable file using UPX, transfer it to the IPC@CHIP® via FTP and start it by telecontrolling a terminal program. |
18.07.2008 |
|
setup_postmake2_v2580.exe |
|
1.002,13 KB |
|
| |
|
|
|
Registry update for CoDeSys v2.3
For a successful communication of CoDeSys with the FULL RTS via TCP/IP, the default buffer size must be set to 32 KB. Execute this registry update to adjust the setting. |
14.05.2007 |
|
 add_tcp_driver_settings_full_rts.zip |
|
402,00 Bytes |
|
| |
|
|
|
CoDeSys@CHIP-SDK Edition 10.2007 Release
This package allows to adapt the CoDeSys Windows programming system and the run time system (running on the IPC@CHIP®). It enables the CoDeSys programming environment to gain full access to the IPC@CHIP® hardware and software functionalities required by your application. Use this package to create your own IPC@CHIP® based CoDeSys programmable controller. |
04.02.2008 |
|
codesysatchip_sdk_edition_10_2007.exe |
|
21,4 MB |
|
|
|
examples |
|
|
|
DK51 IEC Platform example V1.01
A ready-to-use software package for programming the DK51 using CoDeSys. The belonging source files are included in the CoDeSys@CHIP-SDK. |
09.08.2005 |
|
dk51-iec_platform_v1-01.zip |
|
1,5 MB |
|
| |
|
|
|
DK50 visual presentation v4
The state of the I/O of the DK50 can be visually displayed using several methods. |
29.01.2007 |
|
dk50demov4.zip |
|
301,48 KB |
|
|
 |
Erste Schritte
- Erste Schritte mit dem IPC@CHIP ® und Borland C++
|
|
Erste Schritte
- Erste Schritte mit dem IPC@CHIP ® und CoDeSys
IEC61131-3
|
|
Know How
- Einige Hintergrundinformationen zu ausgewählten Themen
|
|
Online Demos
- Eine Reihe von Onlinedemos zeigt Beispiele der Möglichkeiten
|
|
IPC@CHIP® RTOS
- Informationen over the operation systems
|
|
|
|
|
|
|
|
|
|
Close info
Top of page
